ds21350 rev. b-3 1 of 2 mp25005/w - mp2510/w mp25005/w - mp2510/w 25a bridge rectifier features w suffix designates wire leads no suffix designates faston terminals mp-w c a g e b h (ac) (ac) (+) (-) h j a c k a m b h h l p a p (ac) (ac) (-) (+) mp maximum ratings and electrical characteristics @ t a = 25 c unless otherwise specified mechanical data single phase, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. characteristic symbol mp25 005/w mp25 01/w mp25 02/w mp25 04/w mp25 06/w mp25 08/w mp25 10/w unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r(rms) 35 70 140 280 420 560 700 v average rectified output current @ t c = 55 c i o 25 a non-repetitive peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method) i fsm 300 a forward voltage (per element) @ i f = 12.5a v f 1.1 v peak reverse current @ t c = 25 c at rated dc blocking voltage @ t c = 125 c i rm 10 0.5 m a ma i 2 t rating for fusing (note 1) i 2 t 373 a 2 s typical junction capacitance (note 2) c j 300 pf typical thermal resistance junction to case (note 3) r q jc 3.8 k/w operating and storage temperature range t j, t stg -65 to +125 c notes: 1. non-repetitive, for t > 1.0ms and t < 8.3ms. 2. measured at 1.0mhz and applied reverse voltage of 4.0v dc. 3. thermal resistance junction to case per element mounted on heatsink. diffused junction low reverse leakage current low power loss, high efficiency surge overload rating to 300a peak case to terminal isolation voltage 1500v ul listed: recognized component index, file number e95060 case: molded plastic with heatsink internally mounted in the bridge encapsulation terminals: plated leads solderable per mil-std-202, method 208 polarity: symbols marked on case mounting: through hole for #10 screw mounting torque: 8.0 inch-pounds maximum mp weight: 23 grams (approx.) mp-w weight: 17 grams (approx.) mounting position: any mp / mp-w dim min max a 28.40 28.70 b 9.70 10.00 c 15.70 16.70 e 22.86 25.40 g 13.50 14.50 h hole for #10 screw 5.08 ? nominal j 17.50 18.50 k 10.90 11.90 l 0.97 ? 1.07 ? m 30.50 p 17.60 18.60 all dimensions in mm power semiconductor
ds21350 rev. b-3 2 of 2 mp25005/w - mp2510/w 1.0 10 100 1000 0.2 0.6 1.0 1.4 1.8 2.2 v , instataneous forward voltage (v) fig. 2 typical forward characteristics f i , instantaneous fowzrd current (a) f 0 100 200 300 400 1.0 10 100 number of cycles at 60 hz fig. 3 maximum non-repetitive surge current peak forward surge current (a) single half-sine-wave jedec method 0.01 0.1 1.0 10 0 20 40 60 80 100 120 140 instantaneous reverse current (a) percent of rated peak reverse voltage (v) fig. 4 typical reverse characteristics t = 25c j t = 125c j 0 5 10 20 25 15 25 50 75 100 125 i , average rectified current (a) o t , case temperature (c) fig. 1 forward current derating curve c resistive or inductive load
|
